China wholesaler CHINAMFG 15HP Outboard Drive Shaft 63V-45510-10 Long Shaft 22.3″ Fit for CHINAMFG 9.9/15HP Outboard Engine /Motor

Product Description

Durability Against Shallow Water

The sleeve, under panel and upper panel of the water pump is hardened with hard chrome plating to increase durability against sand and mud.

Programmed Tilt (for Shallow Water Drive)

The outboards feature a programmed tilt system that offers easy, three-stage adjustment of the outboard angle for shallow water operation. The system is equipped with a reverse lock that automatically engages when the engine is returned to its normal operating position to prevent the engine from kicking up.

Carrying Handle

A new retractable carrying handle folds down and out of the way, when not needed. In addition to making the outboard easier to carry, it gives the engine a more compact form when mounted on the transom.

Keystone Piston Rings

Special keystone piston rings use a unique design that delivers more power to the crankshaft with reduced energy loss. The rings also increase combustion efficiency, offer greater durability, reduce fuel consumption, and lessen the chance of sticking rings.

Through Prop Hub Exhaust

In addition to quiet operation, a through prop hub exhaust system provides greater exhaust efficiency resulting in increased combustion and acceleration. Other advantages include reduced power loss and superior high-speed operation.

Loop Charge Intake System

Dome-shaped pistons and cylinder heads help move more air and fuel into and exhaust out of the cylinder increasing both combustion and power for every stroke. With this, Suzuki’s two-strokes deliver better fuel economy, more power per cm3 and greater overall performance.

Capacitive Discharge Ignition (CDI)

The CDI Unit System is used together with the ignition coil and functions as an over-rev protection device. This unit also provides stable idling.

Suzuki’s Anti Corrosion Finish

All Suzuki outboards receive this specially formulated, anti-corrosion finish. Applying the finish directly to the aluminum alloy allows for maximum bonding between the finish and aluminum creating an outstanding treatment against corrosion.

 

B7HS-10 SPARK PLUG
63V-42610-20-4D TOP COWLING ASSY
63V-42815-01-4D LEVER,CLAMP
6E7-42816-00 LEVER,CLAMP
63V-41111-02 HANDLE,GEAR SHIFT
CRANKCASE ASSY 63V-15100-02-1S
HEAD ,CYLINDER 1 6E7-11111-01-1S
HOSE 90445-07M08
PIPE,JOINT 650-14485-03
PIPE,JOINT 624-14485-00
GASKET,CYLINDER HEAD 1 63V-11181-A2
INNER COVER,EXHAUST 63V-41100-00-1S
GASKET EXHAUST OUTER /INNER COVER 63V-41112-A0
OUTER COVER,EXHAUST 63V-41113-00-1S
GASKET,UPPER CASE 63V-45113-A1
OIL SEAL,CRANKSHAFT  93110-23M00
CRANKSHAFT 63V-11400-01
HOUSING,OIL SEAL 63V-15936-01-94
OIL SEAL 93102-25M48
OIL SEAL 93101-25018
OIL SEAL 93101-13018
KEY WOODRUFF 95710-05013
CRANK 1 63V-11412-00
CRANK 2 63V-11422-00
CRANK 3 63V-11432-00
CRANK 4 63V-11442-00
BEARING 93306-205U7
PISTON KIT&CLIP&PIN 6E7-11631-00-97
PISTON RING X2 682-11610-01
SEAL LABYRINTH 1 63V-11515-02
CONNECTING ROD KIT 650-11650-00
BEARING,CONNECTING ROD 93310-620V5
PIN,DOWEL 93602-14104
REED VALVE ASSY 63V-13610-10
CARBURETOR ASSY 1 63V-14301-00
CARBURETOR REPAIR KIT 63V-W0093-00
FLOAT 63V-14985-00
NEEDLE VALVE 6G1-14546-01
FUEL FILTER 61N-24560-00
 PRIMERS PUMP ASSEMBLY 61J-24360-00
 FUEL PIPE COMP 1 61J-24306-04
 FUEL PIPE JOINT 2 6G1-24305-05
 FUEL PIPE JOINT 2 6Y1-24305-06
FUEL PIPE JOINT 1 6G1-24304-02
STARTER ASSY 63V-15710-13
SPRING,STARTER 63V-15713-00
DURM,SHEAVE 63V-15714-00
PAWL,DRIVE 63V-15741-00
SPRING,PAWL DRIVE 63V-15705-00
SPRING 63V-15767-00
SPRING RETURN 63V-15784-00
PLATE,DRIVE 63V-15716-00
STARTER ROPE  
STARTER ROPE 5MM/6MM *50M
ROTOR ASSY 63V-85550-11
COIL CHARGE 63V-85520-01
IGNITION COIL 63V-85570-00
CDI 63V-85540-00
LIGHTING COIL 63V-85533-00
PULSER COIL 63V-85580-01
CAP ,PLUG ASSY 663-82370-01
NUT,ROTOR 90170-12066
HANDLE,STEERING ASSY 63V-42111-01-4D
RUBBLE HANDLE 6G1-42177-00
GRIP,STEERING HANDLE 664-42119-00
ENGINE STOP SWITCH ASSY 65W-82575-01
THROTTLE CABLES 6L2-26301-01
BRACKET CLAMP 1 63V-43111-07-4D
BRACKET CLAMP 2 63V-43112-08-4D
TILT ROD ASSY 689-43160-00
BRACKET SWIVEL 1 63V-43311-03-4D
BRACKET SWIVEL ASSY 63V-43311-00
MOUNT DAMPER 63V-44514-01-5B
LOWER CASING ASSY 63V-45330-03-4D
BEARING 93315-314V8
BEARING 93315-317U2
SLEEVE,DRIVE SHAFT 63V-45536-00
DRIVE SHAFT ASSY 63V-45510-11
BUSH,DRIVING SHAFT  626-45316-09(90381-14571)
PROPELLER SHAFT 683-45611-00
CLUTCH DOG 682-45631-00
TRUST BEARING 93341-41414
TRUST BEARING 93341-41414
PIN,STRAIGHT 95710- 0571 1
SPRING, CROSS PIN 648-45633-00
HOUSING,BEARING 63V-45531-00-5B
KEY WOODRUFF 63V-44338-00
IMPELLER 63V-44352-01
WATER PUMP HOUSING  63V-44301-00
DAMPER,WATER SEAL 647-44366-00
OUTER PLATE,CARTRIDGE 63V-44323-00
INSERT CARTRIDGE 63V-44322-00
OIL SEAL 93101-20048
OIL SEAL 93101-17054
CAP ,LOWER CASE 683-45361-02-4D
PINION 63V-45551-00
FORWARD GEAR 6E7-45560-01
REVERSE GEAR 6E7-45571-00
BEARING 93306-00501
BEARING 93332-00005
NUT,PINION 90179-08M06
PROPELLER  683-45941-00-EL
SPACER 6E7-45987-01
NUT,CASTLE 90171-10M01
PIN,COTTER 91490-3571
FUEL HOSE 6*8mm/50M
 24L FUEL TANK 6YJ-24201-00
FUEL METER ASSY *24L TANK 6YJ-24260-00/6Y1-24260-12
FUEL TRNAK FILTER  6YJ-24260-00-1
12L FUEL TANK  
FUEL METER ASSY*12L TANK 6Y1-24260-12
STRAINER 6YJ-24167-00
CAP,TANK ASSY  6YJ-24610-01
CONNECTOR,SHFIT ROD 61N-44146-00
LEVER,SHIFT ROD 63V-44121-01
WATER TUBE 63V-44361-11

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 1 Year
Warranty: 1 Year
Application: Boat
Standard: ISO
Customized: Non-Customized
Surface Treatment: Polished
Samples:
US$ 40/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pto shaft

How do manufacturers ensure the compatibility of drive shafts with different equipment?

Manufacturers employ various strategies and processes to ensure the compatibility of drive shafts with different equipment. Compatibility refers to the ability of a drive shaft to effectively integrate and function within a specific piece of equipment or machinery. Manufacturers take into account several factors to ensure compatibility, including dimensional requirements, torque capacity, operating conditions, and specific application needs. Here’s a detailed explanation of how manufacturers ensure the compatibility of drive shafts:

1. Application Analysis:

Manufacturers begin by conducting a thorough analysis of the intended application and equipment requirements. This analysis involves understanding the specific torque and speed demands, operating conditions (such as temperature, vibration levels, and environmental factors), and any unique characteristics or constraints of the equipment. By gaining a comprehensive understanding of the application, manufacturers can tailor the design and specifications of the drive shaft to ensure compatibility.

2. Customization and Design:

Manufacturers often offer customization options to adapt drive shafts to different equipment. This customization involves tailoring the dimensions, materials, joint configurations, and other parameters to match the specific requirements of the equipment. By working closely with the equipment manufacturer or end-user, manufacturers can design drive shafts that align with the equipment’s mechanical interfaces, mounting points, available space, and other constraints. Customization ensures that the drive shaft fits seamlessly into the equipment, promoting compatibility and optimal performance.

3. Torque and Power Capacity:

Drive shaft manufacturers carefully determine the torque and power capacity of their products to ensure compatibility with different equipment. They consider factors such as the maximum torque requirements of the equipment, the expected operating conditions, and the safety margins necessary to withstand transient loads. By engineering drive shafts with appropriate torque ratings and power capacities, manufacturers ensure that the shaft can handle the demands of the equipment without experiencing premature failure or performance issues.

4. Material Selection:

Manufacturers choose materials for drive shafts based on the specific needs of different equipment. Factors such as torque capacity, operating temperature, corrosion resistance, and weight requirements influence material selection. Drive shafts may be made from various materials, including steel, aluminum alloys, or specialized composites, to provide the necessary strength, durability, and performance characteristics. The selected materials ensure compatibility with the equipment’s operating conditions, load requirements, and other environmental factors.

5. Joint Configurations:

Drive shafts incorporate joint configurations, such as universal joints (U-joints) or constant velocity (CV) joints, to accommodate different equipment needs. Manufacturers select and design the appropriate joint configuration based on factors such as operating angles, misalignment tolerances, and the desired level of smooth power transmission. The choice of joint configuration ensures that the drive shaft can effectively transmit power and accommodate the range of motion required by the equipment, promoting compatibility and reliable operation.

6. Quality Control and Testing:

Manufacturers implement stringent quality control processes and testing procedures to verify the compatibility of drive shafts with different equipment. These processes involve conducting dimensional inspections, material testing, torque and stress analysis, and performance testing under simulated operating conditions. By subjecting drive shafts to rigorous quality control measures, manufacturers can ensure that they meet the required specifications and performance criteria, guaranteeing compatibility with the intended equipment.

7. Compliance with Standards:

Manufacturers ensure that their drive shafts comply with relevant industry standards and regulations. Compliance with standards, such as ISO (International Organization for Standardization) or specific industry standards, provides assurance of quality, safety, and compatibility. Adhering to these standards helps manufacturers meet the expectations and requirements of equipment manufacturers and end-users, ensuring that the drive shafts are compatible and can be seamlessly integrated into different equipment.

8. Collaboration and Feedback:

Manufacturers often collaborate closely with equipment manufacturers, OEMs (Original Equipment Manufacturers), or end-users to gather feedback and incorporate their specific requirements into the drive shaft design and manufacturing processes. This collaborative approach ensures that the drive shafts are compatible with the intended equipment and meet the expectations of the end-users. By actively seeking input and feedback, manufacturers can continuously improve their products’ compatibility and performance.

In summary, manufacturers ensure the compatibility of drive shafts with different equipment through a combination of application analysis, customization, torque and power capacity considerations, material selection, joint configurations, quality control and testing, compliance with standards, and collaboration with equipment manufacturers and end-users. These efforts enable manufacturers to design and produce drive shafts that seamlessly integrate with various equipment, ensuring optimal performance, reliability, and compatibility in different applications.

pto shaft

How do drive shafts handle variations in load and vibration during operation?

Drive shafts are designed to handle variations in load and vibration during operation by employing various mechanisms and features. These mechanisms help ensure smooth power transmission, minimize vibrations, and maintain the structural integrity of the drive shaft. Here’s a detailed explanation of how drive shafts handle load and vibration variations:

1. Material Selection and Design:

Drive shafts are typically made from materials with high strength and stiffness, such as steel alloys or composite materials. The material selection and design take into account the anticipated loads and operating conditions of the application. By using appropriate materials and optimizing the design, drive shafts can withstand the expected variations in load without experiencing excessive deflection or deformation.

2. Torque Capacity:

Drive shafts are designed with a specific torque capacity that corresponds to the expected loads. The torque capacity takes into account factors such as the power output of the driving source and the torque requirements of the driven components. By selecting a drive shaft with sufficient torque capacity, variations in load can be accommodated without exceeding the drive shaft’s limits and risking failure or damage.

3. Dynamic Balancing:

During the manufacturing process, drive shafts can undergo dynamic balancing. Imbalances in the drive shaft can result in vibrations during operation. Through the balancing process, weights are strategically added or removed to ensure that the drive shaft spins evenly and minimizes vibrations. Dynamic balancing helps to mitigate the effects of load variations and reduces the potential for excessive vibrations in the drive shaft.

4. Dampers and Vibration Control:

Drive shafts can incorporate dampers or vibration control mechanisms to further minimize vibrations. These devices are typically designed to absorb or dissipate vibrations that may arise from load variations or other factors. Dampers can be in the form of torsional dampers, rubber isolators, or other vibration-absorbing elements strategically placed along the drive shaft. By managing and attenuating vibrations, drive shafts ensure smooth operation and enhance overall system performance.

5. CV Joints:

Constant Velocity (CV) joints are often used in drive shafts to accommodate variations in operating angles and to maintain a constant speed. CV joints allow the drive shaft to transmit power even when the driving and driven components are at different angles. By accommodating variations in operating angles, CV joints help minimize the impact of load variations and reduce potential vibrations that may arise from changes in the driveline geometry.

6. Lubrication and Maintenance:

Proper lubrication and regular maintenance are essential for drive shafts to handle load and vibration variations effectively. Lubrication helps reduce friction between moving parts, minimizing wear and heat generation. Regular maintenance, including inspection and lubrication of joints, ensures that the drive shaft remains in optimal condition, reducing the risk of failure or performance degradation due to load variations.

7. Structural Rigidity:

Drive shafts are designed to have sufficient structural rigidity to resist bending and torsional forces. This rigidity helps maintain the integrity of the drive shaft when subjected to load variations. By minimizing deflection and maintaining structural integrity, the drive shaft can effectively transmit power and handle variations in load without compromising performance or introducing excessive vibrations.

8. Control Systems and Feedback:

In some applications, drive shafts may be equipped with control systems that actively monitor and adjust parameters such as torque, speed, and vibration. These control systems use sensors and feedback mechanisms to detect variations in load or vibrations and make real-time adjustments to optimize performance. By actively managing load variations and vibrations, drive shafts can adapt to changing operating conditions and maintain smooth operation.

In summary, drive shafts handle variations in load and vibration during operation through careful material selection and design, torque capacity considerations, dynamic balancing, integration of dampers and vibration control mechanisms, utilization of CV joints, proper lubrication and maintenance, structural rigidity, and, in some cases, control systems and feedback mechanisms. By incorporating these features and mechanisms, drive shafts ensure reliable and efficient power transmission while minimizing the impact of load variations and vibrations on overall system performance.

pto shaft

Are there variations in drive shaft designs for different types of machinery?

Yes, there are variations in drive shaft designs to cater to the specific requirements of different types of machinery. The design of a drive shaft is influenced by factors such as the application, power transmission needs, space limitations, operating conditions, and the type of driven components. Here’s an explanation of how drive shaft designs can vary for different types of machinery:

1. Automotive Applications:

In the automotive industry, drive shaft designs can vary depending on the vehicle’s configuration. Rear-wheel-drive vehicles typically use a single-piece or two-piece drive shaft, which connects the transmission or transfer case to the rear differential. Front-wheel-drive vehicles often use a different design, employing a drive shaft that combines with the constant velocity (CV) joints to transmit power to the front wheels. All-wheel-drive vehicles may have multiple drive shafts to distribute power to all wheels. The length, diameter, material, and joint types can differ based on the vehicle’s layout and torque requirements.

2. Industrial Machinery:

Drive shaft designs for industrial machinery depend on the specific application and power transmission requirements. In manufacturing machinery, such as conveyors, presses, and rotating equipment, drive shafts are designed to transfer power efficiently within the machine. They may incorporate flexible joints or use a splined or keyed connection to accommodate misalignment or allow for easy disassembly. The dimensions, materials, and reinforcement of the drive shaft are selected based on the torque, speed, and operating conditions of the machinery.

3. Agriculture and Farming:

Agricultural machinery, such as tractors, combines, and harvesters, often requires drive shafts that can handle high torque loads and varying operating angles. These drive shafts are designed to transmit power from the engine to attachments and implements, such as mowers, balers, tillers, and harvesters. They may incorporate telescopic sections to accommodate adjustable lengths, flexible joints to compensate for misalignment during operation, and protective shielding to prevent entanglement with crops or debris.

4. Construction and Heavy Equipment:

Construction and heavy equipment, including excavators, loaders, bulldozers, and cranes, require robust drive shaft designs capable of transmitting power in demanding conditions. These drive shafts often have larger diameters and thicker walls to handle high torque loads. They may incorporate universal joints or CV joints to accommodate operating angles and absorb shocks and vibrations. Drive shafts in this category may also have additional reinforcements to withstand the harsh environments and heavy-duty applications associated with construction and excavation.

5. Marine and Maritime Applications:

Drive shaft designs for marine applications are specifically engineered to withstand the corrosive effects of seawater and the high torque loads encountered in marine propulsion systems. Marine drive shafts are typically made from stainless steel or other corrosion-resistant materials. They may incorporate flexible couplings or dampening devices to reduce vibration and mitigate the effects of misalignment. The design of marine drive shafts also considers factors such as shaft length, diameter, and support bearings to ensure reliable power transmission in marine vessels.

6. Mining and Extraction Equipment:

In the mining industry, drive shafts are used in heavy machinery and equipment such as mining trucks, excavators, and drilling rigs. These drive shafts need to withstand extremely high torque loads and harsh operating conditions. Drive shaft designs for mining applications often feature larger diameters, thicker walls, and specialized materials such as alloy steel or composite materials. They may incorporate universal joints or CV joints to handle operating angles, and they are designed to be resistant to abrasion and wear.

These examples highlight the variations in drive shaft designs for different types of machinery. The design considerations take into account factors such as power requirements, operating conditions, space constraints, alignment needs, and the specific demands of the machinery or industry. By tailoring the drive shaft design to the unique requirements of each application, optimal power transmission efficiency and reliability can be achieved.

China wholesaler CHINAMFG 15HP Outboard Drive Shaft 63V-45510-10 Long Shaft 22.3China wholesaler CHINAMFG 15HP Outboard Drive Shaft 63V-45510-10 Long Shaft 22.3
editor by CX 2024-05-17