China Huading Swp-E Type Cardan Drive Shaft for Industrial Machinery pto shaft for bush hog

Item Description

Telescopic flange prolonged cardan shaft Coupling(SWP-E)

Cardan shaft is commonly utilized in rolling mill, punch, straightener, crusher, ship drive, paper generating products, typical equipment, water pump equipment, check bench, and other mechanical purposes.

1. Low daily life-cycle costs and extended provider existence
2. Increase productiveness
three. Professional and revolutionary answers
four. Reduce carbon dioxide emissions, and environmental defense
five. High torque ability even at big deflection angles
six. Easy to move and run easily

·Mark case in point:
Tactical diameter E=390mm,Installation duration L=1823mm,E kind cardan shaft
SWP390E×1823 Coupling JB/T3241-ninety one

·SWP E Type Cardan Shaft Standard Parameter And Major Dimension(JB/T3241-1991)

Type Tactical diameter
Nominal torque
Fatique torque Tf
Dimension(mm) Rotary
Lmin D1
D3 E E1 B×h h1 L1 n-d Lmin Enhance
one hundred
Lmin Increase
SWP160E a hundred and sixty sixteen 8 ≤10 715 140 95 114 fifteen 4 20×12 6 85 six-13 .15 .0056 35
SWP180E 180 20 10 ≤10 800 one hundred fifty five one hundred and five 121 fifteen four 24×14 seven 95 six-fifteen .25 .0072 47 2.three
SWP200E 200 31.five 16 ≤10 880 one hundred seventy five 125 127 17 5 28×16 8 a hundred and ten eight-15 .forty two .0114 67 three.four
SWP225E 225 forty twenty ≤10 one thousand 196 a hundred thirty five 152 twenty 5 32×18 9 a hundred thirty 8-seventeen .75 .5710 ninety four 6.six
SWP250E 250 63 31.5 ≤10 1055 218 a hundred and fifty 168 twenty five 5 40×25 12.5 one hundred thirty five 8-19 one.26 .0407 a hundred and forty 7.three
SWP285E 285 ninety 45 ≤10 1210 245 a hundred and seventy 194 27 7 40×30 fifteen one hundred fifty 8-21 2.67 .0702 206 9.4
SWP315E 315 one hundred forty sixty three ≤10 1345 280 185 219 32 seven 40×30 fifteen one hundred seventy ten-23 four.38 .1144 271 12.
SWP350E 350 one hundred eighty ninety ≤10 1480 310 210 245 35 eight 50×32 sixteen 185 10-23 seven.42 .1663 355 thirteen.six
SWP390E 390 250 112 ≤10 1623 345 235 273 40 8 70×36 eighteen 205 10-twenty five thirteen.27 .2695 501 18.
SWP435E 435 355 160 ≤10 1860 385 255 299 42 ten 80×40 20 235 16-28 24.sixty two .3645 825 20.
SWP480E 480 450 224 ≤10 2122 425 275 351 forty seven twelve 90×45 22.five 265 sixteen-31 forty two.81 .7571 1144 28.
SWP550E 550 710 315 ≤10 2338 492 320 402 fifty twelve 100×45 22.5 290 sixteen-31 sixty eight.eighty one 1.1842 1589
SWP600E 600 a thousand 500 ≤10 2930 544 380 450 fifty five 15 90×55 27.five 360 22-34 a hundred and ten.sixty 1.7159 2243 40.5
SWP640E 640 1250 630 ≤10 3170 575 385 480 60 15 100×60 thirty 385 eighteen-38 177.seventy seven two.3080 3140 48.3

·Note:L is the length of the set up, including the value of S/Z shrinkage.

♦Product Demonstrate


♦Other Items Checklist

Transmission Machinery 
Components Identify
Universal Coupling WS, WSD, WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
Disc Coupling JMI, JMIJ, JMII, JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Our Organization

HangZhou CZPT Machinery Manufacturing Co., Ltd. is a technological innovation-based company specializing in the layout and manufacture of simple transmission parts and various auxiliary non-standard equipment accessories. The goods are primarily utilised in metallurgy, electric electricity, mining, chemical sector, petroleum, papermaking, shipbuilding, weighty market, and many others.

In many industries, it has supplied strong complex and tools support for many firms about the world. At present, the items are also exported to Russia, Italy, Spain, Brazil, Ukraine, Turkey, Australia, Singapore, Vietnam, Indonesia, Malaysia, Sri Lanka, and other nations and areas.

Welcome to personalize products from our manufacturing unit and remember to supply your design drawings or contact us if you need to have other specifications.

Our Services
1. Layout Solutions
Our design team has encounter in Cardan shafts relating to item design and improvement. If you have any requirements for your new item or desire to make additional advancements, we are listed here to supply our assist.

two. Item Providers
uncooked resources → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3. Samples Procedure
We could create the sample in accordance to your necessity and amend the sample constantly to meet up with your need.

4. Investigation & Advancement
We usually study the new wants of the market and create new designs when there are new autos in the market place.

five. Good quality Management
Every single action need to be a special examination by Specialist Staff in accordance to the common of ISO9001 and TS16949.

Q 1: Are you a trading business or a company?
A: We are a expert manufacturer specializing in production
numerous sequence of couplings.

Q 2:Can you do OEM?
Sure, we can. We can do OEM & ODM for all the clients with customized artworks in PDF or AI structure.

Q 3:How extended is your shipping and delivery time?
Usually, it is twenty-30 days if the merchandise are not in stock. It is according to quantity.

Q 4: Do you provide samples? Is it totally free or added?
Yes, we could provide the sample but not for free. Truly, we have a very very good price tag basic principle, when you make the bulk get the value of the sample will be deducted.

Q 5: How lengthy is your warranty?
A: Our Warranty is 12 months underneath regular circumstances.

Q 6: What is the MOQ?
A: Generally our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling?
A:one hundred% self-inspection prior to packing.

Q 8: Can I have a check out to your factory ahead of the get?
A: Sure, welcome to go to our manufacturing facility.

Q 9: What’s your payment?
A:1) T/T. 

Get in touch with Us

World wide web: huadingcoupling
Add: No.eleven HangZhou Road,Chengnan park,HangZhou Town,ZheJiang Province,China

Material: as Required
Load: as Required
Stiffness & Flexibility: as Required
Journal Diameter Dimensional Accuracy: as Required
Axis Shape: as Required
Shaft Shape: as Required
US$ 500/Piece
1 Piece(Min.Order)

Request Sample



Customized Request

Power Take-Off (PTO) Shafts

Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.

Power take-off (PTO) shaft

Shaft CollarThe power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.


There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.


Shaft CollarA PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.


It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.


Shaft CollarOne of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
China Huading Swp-E Type Cardan Drive Shaft for Industrial Machinery     pto shaft for bush hogChina Huading Swp-E Type Cardan Drive Shaft for Industrial Machinery     pto shaft for bush hog
editor by CX 2023-04-10